Blue Cross Enterprises

G/EPON 1GE+CATV ONT is support Dual mode(EPON and GPON), It can also be applied to a widetemperature environment, and also has a powerful firewall function.G/EPON 1GE+CATV ONT meets telecom operators FTTO (office), FTTD (Desk), FTTH (Home) broadbandaccess, TV and other requirements. The box is based on the mature Gigabit GPON/EPON technology, highlyreliable and easy to maintain, with guaranteed QOS for different service. And it is fully compliant withtechnical regulations such as ITU-T G.984.x and IEEE802.3ah

The SY-EYDFA- 2U series high power amplifier is a high power multi-output optical fiber amplifier with a gain spectrum bandwidth of 1535~1565nm. It is mainly designed for CATV or 1~8 continuous strip channels (ITU wavelength) applications. It provides a flexible, low-cost solution for large-scale FTTH coverage of CATV systems in large and medium-sized citie

The SY-EYDFA- 2U series high power amplifier is a high power multi-output optical fiber amplifier with a gain spectrum bandwidth of 1535~1565nm. It is mainly designed for CATV or 1~8 continuous strip channels (ITU wavelength) applications. It provides a flexible, low-cost solution for large-scale FTTH coverage of CATV systems in large and medium-sized cities. SY-EYDFA- 2U can achieve single-wavelength cable TV transmission, CWDM single-fiber three- wave, flat-gain type, DWDM; its reliable and excellent performance ratio between the main application of FTTH, FTTB, DBS, MMDS, FTTX, PON, is to build CATV large Medium-sized optical fiber transmission network is an important equipment. 

The SY-EYDFA- 2U series high power amplifier is a high power multi-output optical fiber amplifier with a gain spectrum bandwidth of 1535~1565nm. It is mainly designed for CATV or 1~8 continuous strip channels (ITU wavelength) applications. It provides a flexible, low-cost solution for large-scale FTTH coverage of CATV systems in large and medium-sized cities.

The SY-EYDFA- 2U series high power amplifier is a high power multi-output optical fiber amplifier with a gain spectrum bandwidth of 1535~1565nm. It is mainly designed for CATV or 1~8 continuous strip channels (ITU wavelength) applications. It provides a flexible, low-cost solution for large-scale FTTH coverage of CATV systems in large and medium-sized cities. SY-EYDFA- 2U can achieve single-wavelength cable TV transmission, CWDM single-fiber three- wave, flat-gain type, DWDM; its reliable and excellent performance ratio between the main application of FTTH, FTTB, DBS, MMDS, FTTX, PON, is to build CATV large Medium-sized optical fiber transmission network is an important equipment

• User self calibration function
• Comfortable LCD display and optional backlight LCD display supports night operation Power measurements in dBm or mw and insertion loss in dB
• Low battery consumption, more than 240 hours continual operation time for three 1.5V alkaline batteries 10 minutes Auto-off function can be activated or deactivated.

• 1/2.8" Progressive Scan CMOS
• 2048×1536 resolution
• H.265, H.265+
• 120dB WDR
• Ip67, Ik10
• BLC/3D DNR/ROI
• Smart encoding: Support low bit rate, low latency
• Humanoid Detection
• Wifi Supported
• Two Way audio supported

SY-EDFA-16X19-34MSW

SY-GPON-1000R2-2WDONT

• 10/100/1000Mbps auto-???sensed, easily upgrade
• Full duplex and half duplex auto sensed
• MDI/MDI XAutoNegotiation
• 10/100/1000Mbps store and forward
• 1000Mbps cut through transmission
• Packet size up to1518bytes
• Support 9K Jumbo Frame
• Supporting VLAN / VoIP/QoS packets
• Support flow control and reduce broadcast packets
• Supporting STPto form a redundant network
• Extremely low power consumption, low heat, stable performance
• Providing Desktop, Wall mounted, Chassis, DIN rail installation

• It features ingenious appearance, wide range of power measurement, high accuracy and user self-calibration function with high performance-to-price ratio
• One year Warranty
• Power Meter is a compact and an easy-to-use testing instrument for optical fiber networks, which can be used for absolute optical power measurements as well as for relative loss measurements in optical fibers

• Optical power meter is a kind of accurate and durable portable instrument for the installation, operation and maintenance of optical fiber network specially designed..
• Product has a compact shape, can choose to switch backlight display and automatic shutdown function, optical power ultra wide test range, precision testing accuracy to generic interface and design. At the same time, linear index (MW) and nonlinear indexes (DBM) and wavelength selection screen display.

SFP+, 10G, BIDI, 1270/1330NM,

80KM, SMF, DDM

SyRotech GOCP-BI2396-80 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up To 10km in 9/125um single mode fiber.

SFP+, 10G, BIDI, 1330/1270NM,

80KM, SMF, DDM

• Compliant with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-TX, IEEE 802.3z 1000Base-FX Standards.
• Provide one 10/100/1000Base-Tport with RJ-45 connector, one SFPSlot socket.
• Full-duplex and half-duplex auto-sensed
• Supports Auto MDI / MDI-X function
• Supporting the transmission of extra-long VLAN packets
• Supporting Quality of Service (QoS) and ensuring the transmission of VoIPpackets
• Supporting STPto form a redundant network
• Front panel Diagnostic LED Indications

• Auto splice mode manifest user-friendly design.
• V-Groove cladding alignment, high quality and low loss.
• Dust-proof, waterproof, high temperature resistance, adapting to various altitude and formidable natural conditions.
• 5-inch high-resolution color LCD touch screen, 500X magnification, visible clearly with bare eyes.
• Packed with detachable 6800mAh battery, more than 340 times of splicing and heating: high-power LED white light simplifies your work at night.

SFP+, 10G, BIDI, 1270/1330NM,

80KM, SMF, DDM

SyRotech GOCP-BI2396-80 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up To 10km in 9/125um single mode fiber.

SFP+, 10G, BIDI, 1330/1270NM,

80KM, SMF, DDM

SFP 25G, 1310NM, 10KM

Syrotech GOXP-1328-10 transceivers are designed for use in Ethernet links up to 25.78 Gb/s data rate and up to 10 km link length. They are compliant SFF-8472 , and compa

"5MP Metal Motorized Zoom Varifocal AF IP Dome Camera, 5X AF Lens 2.7-13.5mm"

SFP+, 10G, BIDI, 1270/1330NM,

60KM, SMF, DDM

SyRotech GOXP-BI2396-60 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to 60km in 9/125um single mode fiber.

SFP+, 10G, BIDI, 1330/1270NM,

60KM, SMF, DDM

SyRotech GOXP-BI3296-60 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to 60km in 9/125um single mode fiber.

SFP28 25G, 1270/1330, 

20KM SMF

SyRotech GOCP-BI2396-20 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF8472 and SFP+ MSA. The module data link up to 10km in 9/125um single mode fiber. 

SFP+, 10G, BIDI, 1330/1270NM,

20KM, SMF, DDM

SyRotech GOXP-Bi3296-20 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to 10km in 9/125um single mode fiber

GOMC-8512-02 10/100/1000M Fiber Media Converter translates the signal from a twist-pair 10/100/1000Base-TX cable to 1000Base-FX fiber optic cable, extends data transmission distance from 100m via copper cables to 2 km by dual fiber optic cable

2 Door / 4 Reader

Communication : LAN

Register Cards : 42000

Record Capacity : 200000

• 10/100/1000Mbps auto-???sensed, easily upgrade
• Full duplex and half duplex auto sensed
• MDI/MDI XAutoNegotiation
• 10/100/1000Mbps store and forward
• 1000Mbps cut through transmission
• Packet size up to1518bytes
• Support 9K Jumbo Frame
• Supporting VLAN / VoIP/QoS packets
• Support flow control and reduce broadcast packets
• Supporting STPto form a redundant network
• Extremely low power consumption, low heat, stable performance
• Providing Desktop, Wall mounted, Chassis, DIN rail installation

40G QSFP+, 1310nm, ER4, 40KM

The GOXQ-1340G-ER4 is a transceiver module designed for 10Km optical    communication applications. The design is compliant to 40GBASE-LR4 of the    IEEE P802.3ba standard. The module converts 4 inputs channels (ch) of    10Gb/s electrical data to  4 CWDM optical signals, and multiplexes them into    a single channel for 40Gb/s optical transmission. Reversely, on the receiver    side, the module optically de-­‐multiplexes a 40 GB/s input into 4 CWDM    channels signals, and converts them to 4 channel output electrical data. The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and    1331nm as members Of the CWDM wavelength grid defined in ITU‐T G694.2. It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single­mode fiber (SMF) has to be applied in this module. The product is designed with form factor, optical/electrical connection and digital diagnostic Interface according to the QSFP Multi‐Source Agreement (MSA). It has been    designed to meet the harshest external operating conditions including    temperature, humidity and EMI interference. The module operates from a    single +3.3V power supply and LVCMOS/LVTTL global control signals such as    Module Present, Reset, Interrupt and Low Power Mode are available with the    modules. A 2-­wire serial interface is available to send and receive more   complex control signals and to obtain digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility. The GOXQ-1340G-ER4 is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi­Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface