Blue Cross Enterprises

• Specifications :
  • Bandwidth density of 100 Gbps bi-directional
  • Transmission data rate up to 25.8Gbps per channel
  • 4channels 850nm 25G VCSEL array
  • 4 channels 25G PIN photo detector array
  • Internal CDR circuits on both receiver and transmitter channels
  • Hot Pluggable QSFP28 form factor

• Specifications :
  • UP to 25.78Gb/s bi-direconal data links 
  • Hot-Pluggable SFP28 footprint 
  • Duplex LC connector 
  • 1310nm DFB laser transmier 
  • Up to 10km on 9/125m SMF
  • RoHS compliant 

• Specifications :
  • Up to 28.05Gb/s bit rates 
  • Hot-Pluggable 
  • Duplex LC connector 
  • 850nm VCSEL transmitter, PIN photo-detector 
  • Up to 100m on OM4 MMF, 70m on OM3 MMF
  • RoHS compliant

SFP+, 10G, BIDI, 1270/1330NM,

60KM, SMF, DDM

SyRotech GOXP-BI2396-60 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to 60km in 9/125um single mode fiber.

SFP+, 10G, BIDI, 1330/1270NM,

60KM, SMF, DDM

SyRotech GOXP-BI3296-60 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to 60km in 9/125um single mode fiber.

SFP28 25G, 1270/1330, 

20KM SMF

SyRotech GOCP-BI2396-20 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF8472 and SFP+ MSA. The module data link up to 10km in 9/125um single mode fiber. 

SFP+, 10G, BIDI, 1330/1270NM,

20KM, SMF, DDM

SyRotech GOXP-Bi3296-20 is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to 10km in 9/125um single mode fiber

 SFP+, 10G, 1550NM, 80KM, SMF, DDM

SFP+ZR Transceiver is designed for 8.5G/10G Fiber- Channel and 10GBE applications. The transceiver consists of 

two sections: The transmitter section incorporates a colded EML laser. And the receiver section consists of an APD 

photodiode integrated with a TIA. All modules satisfy class I laser safety requirements. SFP+ZR Digital diagnostics 

functions are available via a 2-wire serial interface, as specified in SFF-8472, which allows real-time access to device 

operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical 

power and transceiver supply voltage.

SFP+, 10G, 850NM, 

300M, MMF, DDM

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for Quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.

SFP, BIDI, 1.25G, 1310/1550NM,

40KM, SMF, DDM

SFP, BIDI, 1.25G, 1550/1310NM,

40KM, SMF, DDM

SFP,1.25G,1550NM,

80KM, SMF, DDM

The SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 80km transmission distance with SMF. The transceiver consists of three sections: a DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements

SFP 25G, 1310NM, 10KM

Syrotech GOXP-1328-10 transceivers are designed for use in Ethernet links up to 25.78 Gb/s data rate and up to 10 km link length. They are compliant SFF-8472 , and compa

SFP+, 10G, BIDI, 1270/1330NM,

40KM, SMF, DDM

SyRotech GOXP-BI2396-40 IND is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA. The module data link up to10km in 9/125um single mode fiber.

SFP+, 10G, BIDI, 1330/1270NM,

40KM, SMF, DDM

SyRotech GOXP-Bi3296-40 IND is hot pluggable 3.3V Small-Form-Factor transceiver module. It designed expressly for high-speed communication applications that require rates up to 10.7Gbps, it designed to be compliant with SFF-8472 and SFP+ MSA.The module data link up to10km in 9/125um single mode fiber.

SFP28 25G, 1330/1270,  20KM SMF

• Specifications :
  • 4 Channel Full Duplex Transceivers Module.
  • Transmission Data Rate up to 26Gbps Per Channel.
  • 4*26Gb/s DFD Based LAN-WDM Colling Transmitter 4 Channel PIN ROSA.
  • Low Power Consumption.
  • 3.5W Hot Pluggable QSFP From Factor Up to reach 10km for G.652 SMF Duplex LC receptacles.
  • Built in digital Diagnostic Function.
  • ROHS 6 Compliant.

• Specifications :
  • 4 CWDM lanes MUX/DEMUX design  
  • Up to 11.2Gbps per channel bandwidth  
  • Aggregate bandwidth of > 40Gbps  
  • Duplex LC connector  
  • QSFP MSA compliant  
  • Up to 10 km transmission

• 4 channels full-duplex transceiver modules
• Transmission data rate up to 10.5Gbps per channel
• 4 channels PIN photo detector array
• Hot Pluggable QSFP form factor
• Dual LC connector receptacle
• RoHS 6 compliant (lead free)

• Specifications :
  • 4 CWDM lanes MUX/DEMUX design
  • Up to 11.2Gbps per channel bandwidth
  • Aggregate bandwidth of > 40Gbps
  • Duplex LC connector
  • QSFP MSA compliant
  • Up to 40 km transmission

SFP 25G, 850NM, 300M